This bird feeder, unlike your normal everyday bird feeder, has a built in camera that can be connected to Wi-Fi allowing you to view outside your home or business directly from your smart devices. Keeping your properties safe has become much easier.
Crafted in America with over 13 years of experience in building hidden spy cameras. Rest assured you get the best with KJB Security Products' non-stop customer service and tech support.
Best uses: Watch your child’s caregiver, check on your business security, know when the kids come home from school, see what your pet is up too from the other side of the world.
Reviews: Honest Reviews give the Xtreme Life Wi-Fi Landscape Stone 5 out of 5 stars for Ease of Use. Read the review here.
1280x720 Effective Pixels
1/3" digital cmos Image Sensor
140° Field of View
NTSC/PAL Compatible Video System
Operating Temperature 22°F - 158°F
Invisible 940 nm IR's (Night Vision models only)
1280x720 Recording Resolution
H.264 Video Compression
Up to 64GB memory card capacity (Class XC1) - Confirmed with Toshiba and Samsung EVO
Multiple Video Recording Modes
Adjustable Frame Rate
AVI Video Playback Files
Operating temperature 32° F - 122° F
802.11 b/g/n Standards
3 dBi Antenna Gain
iPhone 3GS or higher
iPad iOS 5.1 or higher
Android 2.3 or higher
Estimated time in continuous recording mode
64GB up to 86 hours on HD Resolution
5V 10,000 mAh Lithium-ION Rechargeable
90 days standby in PIR mode
Up to 16 hours in Continuous mode
Charge time 10 hours
Extra batteries are available see A1028
Quick Setup Guide
USB Charging Cable
Zone Shield & Xtreme Life Wi-Fi Quick Set Up Guide
Step 1: Open the Zone Shield® or Xtreme Life™ camera to insert the memory card, connect the power supply, and power on the camera.(For the Xtreme Life™ models, charge the battery pack first ~10 hours for a full charge and connect the battery to power up the camera)
Step 2: Download the “EZ-SEE” App from Apple Store or Google Play to your smartphone or tablet.
Step 3: On your smartphone or tablet, go to your list of available networks and choose the EZ- SEE network (E.g. EZ-SEE_20001234 ) you will be prompted to put in a password the default Password (see your owners manual)
Step 4: Open the “EZ-SEE” APP and. Press the “Add” button in the top-left corner, then press the “SCAN” button in the middle of the next screen.
Step 5: Locate the QR code on your camera and point your smart device’s camera at the QR and the app will scan the code. After scanning, the EZ-SEE App will now directly connect (P-P) your smart phone or tablet to your camera.
Once connected, there will be a pop-up confirming to connect to the internet for remote live view. Select your local Wi-Fi network and type in your password. The camera will reboot and take 1-2 minutes to come back online. Once the camera reboots, it is now ready for live viewing
Note about Battery life: when using the PIR motion setting your battery will last up to 90days in stand by.You may not live view unless the PIR is triggered then you can view up to 10 min post event.
You can use this item in continuous mode and the battery will last up to 8 hours, you can then live view at anytime, no event has to take place. Note viewing uses up battery life.Download Xtreme Life Wireless Manual